You are here: Home » INJECTION MOULD » Household Mould » Beer crate
IMG_2046
IMG_2069
图片2
图片3
JSLMOULD supplied many type beer crate mould and bottle crate mould include 12 bottle crate mould,20 bottle crate mould,24 bottle beer crate mould 
The beer crate materail made of HDPE.
The structure of beer crates is very complex. we use Becu insert on surface to shorten the cooling time. Beer Crate mould use pulling structure during the injection and the beer crates are cosmetic part so we must ask the beer crate deformation is smallest during the injection,easy to assembly and couldn’t leave the gate and ejection pin trail.
Beer bottle crate mould walls require core pulling and use Ha barking structure in the Four sides .Sometimes due to the Ha barking wedge too tight, as well as the beer crate remain in the unclassified part line and difficult to demoulding.So we adopt The pulling hook mechanism for ejection, Made the Ha barking with the pulling hook move out at the same time.

PRODUCTS

We offer the bottle crate design and various bottle crate injection moulding solutions!
The latest 
beer crate mould design with 4 side angle lift design and 4 sides handle with hollow on the 4 side walls.
For this kind of colar crate, we can make the mould 2 cavities with the cycle time 45 seconds, automatic drop down. This kind of 
cola bottle crate moulds have 4 side slides, 4 angle lifts on the cores and 4 pillars on the 4 cavities corners...very popular bottle crate design, protected the glass bottle, reduce the shock of the truck and bumping force from the outside of the crate
 
Project Information
 
Product Description
Part Name Beer crate
Part Material HDPE
Part Size(MM) 423*282*279
 
 
 
Mould Steel
A plate S50C
B plate S50C
Cavity Insert Beryllium Bronze
Core Insert 718 (HRC 34-38)
Slider Insert 718 (HRC 34-38)
Ejector Plate S50C
Spare Parts S50C
 
 
 
Mould Description
Mould Size (L*W*H MM) 1150*950*750
Mould Gross Weight (KGs) 4645
Mould Life Time (Shots) 1,000,000
Mould Manufacturing Cycle 75 days
Surface Finish polishing
Runner Description Hot runner
Injection Gate Type 6 pin points gate
Ejection System Ejector plate
Cycle Time (Second) 60s
Injection moulding machine 800T


 
H1313-CP
R1450-CP
图片1
H1203
H1313
R1450
IMG_2046
IMG_2069
图片2
图片3
IMG_5151
IMG_5152
IMG_5153
IMG_5154
IMG_5155
IMG_5157
IMG_5158
IMG_5159
IMG_5160
IMG_5161
IMG_5162
IMG_5163

Product Inquiry
+ 86 576 8460 0288
+ 86 576 8460 0208
+ 86 576 8460 0206
© 2015-2026 JSL MOULD  |  BEIWEI MOULD INDUSTRY CO.,LTD - ALL RIGHTS RESERVED

SITE MAP